u


HOME
u HISTORY
u CHASSIS
u ENGINE
u BODY
u WHEELS
u TOOLS
u NUTS & BOLTS
u OPERATION
u BUILD TEAM
u PROVENANCE
u REFERENCES
u LINKS
u CONTACT
   

 FINISHED

BEGUN

MECHANICS
   
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Member 
Model T 
Ford Clubs
International

 

STARTING & OPERATION

 

Click Pictures to Enlarge

Here is the basic procedure to start and operate the Model T Ford : Lift up on the floorboard and turn on the gas lever (coming from

the tank). Reach into the cockpit and retard the

spark by pushing up on the left stalk (this step is

important). Set the gas lever by pushing down on

the right stalk a half-inch. Set the handbrake. Turn

the brass knob on the right side of the instrument

panel a quarter-turn clockwise (rich mixture).

Push in the crank until it connects with the engine.

Give it a yank to make sure it turns.


Now, pull out the choke wire twice to prime the

engine. Go back to the cockpit and turn the

ignition switch from off to "Battery." Go back

around to the front of the car, pull up on the crank

handle clockwise one, two or three times. Yes! It

starts. Not with a loud noise and shake, but a low, sure putt-putt. Finally, go back inside and

advance the spark timing by moving the left stalk

about 1 in. down, switch the ignition from "Battery"

to "Magneto," and rest for about 5 minutes while

the engine warms up. Return the choke to its

normal setting when the engine is running

smoothly. And away you go.

.

View of the dash board showing all of the controls.

Illustrating the correct method of grasping the starting crank to avoid injury due to kick back.

Showing the wrong method of exerting pressure on the crank when starting.

 

 

 

t NEXT u